EVERYTHING YOU NEED TO KNOW ABOUT THE MOST POPULAR IP ADDRESS
192.168.1.1 One of the popular IP address used for exclusively
admin log in. these IP addresses are also known as
host addresses. There are several things you should know about your router that
include web interface. It is vital to know about web interface. The interaction
better the user and their particular computer Is known as the web interface.
How to log in 192.168.1.1
Every router has a setting section where you can change some
setting and put advanced configuration.
Here is how;
1. Open your browser for example chrome. Any browser can be used in this case. Avoid
downloading third-party browsers, most f then have viruses.
2. Enter your routers IP address in the line. If you
are using lynksy routers
your is 192.168.1.1. Use that IP address as a default one and press
enter.
You can also change tour IP
address. This is how;
Launching a special setup OD
Or
Using wen interface.
If you happened to have changed it
before and now you’ve forgot here is how to recover it;
You can look or it using special
methods or you can reset your router. You can do this by pressing the button
behind your router. Resetting your router puts it back to factory setting. It
basically deletes all the settings you set
before. If you can recover your IP address with other methods, then do that
instead of re- setting your router.
3. A window appears on which you`ll put admin as default
on both the user name and pass-key.
How to log in to a Netgear router
· The net get router has to be connected to your laptop or pc. Open
the browser and type 192.18.1.1
· Enter the default router name of the Netgear router. Then change the settings and customize settings.
· TP-LINK ROUTER,LOGIN AND IP
Use cable RJ-45 to connect the router and pc. The router has an IP address 192.168.1.1
· Type the IP address in your browser and click send.
· Enter username and password as follows;
IP address 192-168.1.1
Username – admin
Password; admin or password.
· Click wireless setting and customize your settings.
Connecting router shaving the same
IP address
Two routers can be connected in cases where they are using the same ip address.
Here are step by step instructions
to do so;
· Use a Lan cable to connect the pc to the router then go to http://192.168.1.1 or www.192.168.1.1, then enter address, then enter username then password. Then
click access.
· Click network /lan setup and change the IP address to 192.168.1.1
· Con
· connect the router with the lan table and they will work great.
Some routers have an auto set up mode that also allows the users
to configure it. In case the user doesn’t not configure the router
automatically sets itself up. It also sets the password and the IP address. It
is o importance to manually set up your router using the above instructions
depending on your type of gadget.